innercover3

Now comes the most difficult part of getting the cover off. Insert the 8/1.25x50mm bolts or a pair of Suzuki muffler bolts(8X45, part number 09116-08134) into the top and bottom holes outside the center hole in the rounded part of the cover a good ways until snug. Put a little oil/grease/anti-sieze on the bolts, screw them in till they touch, and then keep screwing them in slowly and evenly. Make absolutely certain you have removed all the bolts that hold on the inner clutch cover if it really becomes tight and the bolts don't want to screw in any further. Remember you're also pulling the clutch cover bearing at the same time you're removing the inner clutch cover so it's going to take some effort. Also, there is a metal gasket that surrounds the inner clutch cover, be careful not to damage the gasket.