CVT Problem - Suzuki Burgman Forum
  • 2 Post By Buffalo
  • 2 Post By eddie1c
LinkBack Thread Tools Search this Thread
post #1 of 6 (permalink) Old 02-23-2017, 09:08 PM Thread Starter
New Member
Join Date: Aug 2015
Posts: 8
CVT Problem

After stopping and filling my 2007 Burgman 650 Exe, as I left the gas station, the CVT remained in "1st"gear. I was operating in automatic mode and it acted like I had it in "gear shift mode" and it was stuck and wouldn't accelerate past 25mph as the RPM's were up there. I believe something electrical that controls the CVT system is the problem. I would appreciate any advise as where to look. 10amp fuse is ok.
eddie1c is offline  
Sponsored Links
post #2 of 6 (permalink) Old 02-23-2017, 09:21 PM
Insane Poster
Buffalo's Avatar
Join Date: Aug 2005
Location: Texas, Terrell
Posts: 13,519
Check the switch on the center stand to see if it is stuck.
Dave_J and gec343 like this.
Buffalo is offline  
post #3 of 6 (permalink) Old 02-23-2017, 11:59 PM
Insane Poster
Liamjs's Avatar
Join Date: Oct 2013
Location: Los Angeles, CA
Posts: 4,183
The bike won't shift out of first gear if the center stand is not registered as up. Check that it is or that the switch is working, both can get stuck.

"What is your measure of success? Warren Buffett has always said the measure is whether the people close to you are happy and love you." Bill Gates

Ingrid - '07 Blue Burgman 400 (56k mi) - original owner
Jesse - '05 Silver Burgman 650 (27k mi) - 3rd owner
Liamjs is offline  
post #4 of 6 (permalink) Old 02-24-2017, 12:21 PM
Join Date: May 2012
Posts: 186
Hey there,

I have moved this thread to a more suitable section on the site.
The Tech Support forum is meant for site related issues.

I hope you find the answers you are looking for!
Enjoy the site!

admin is offline  
post #5 of 6 (permalink) Old 02-24-2017, 07:17 PM Thread Starter
New Member
Join Date: Aug 2015
Posts: 8
Thanks Buffalo, I looked and discovered the 1/4 inch round guard around the switch was slightly bent and causing the plunger on the switch to not release completely. Took some vise grips and straightened the round guard and all is well. Thank you !!
Dave_J and gec343 like this.
eddie1c is offline  
post #6 of 6 (permalink) Old 02-24-2017, 08:23 PM
Super Poster
Skunkhome's Avatar
Join Date: Sep 2016
Location: SE Louisiana
Posts: 450
Wow this site is a well of knowledge.
Skunkhome is offline  

Quick Reply

Register Now

In order to be able to post messages on the Suzuki Burgman Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
CVT problem - maybe Hans Von Scrofula Burgman 650 357 10-24-2016 07:51 PM
CVT problem?! Or something else MaX_ST Burgman 650 18 10-07-2014 09:48 AM
K5 CVT Problem I think lefrance12 Burgman 650 2 02-10-2011 12:45 PM
CVT problem? fnmornik Burgman 650 4 03-29-2009 01:03 PM
CVT Problem ??? magyver Burgman 650 34 04-26-2007 02:41 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome